Nerf and Chin Bars
mcmillanrodandcustom.com
Please call us @ 715-387-6847 to place an order.
HomeAbout Us
EventsRequest A CatalogMoldingsNerf BarsPersonal ProjectsAir Cleaners/ScoopsContact UsTube BumpersCustom WorkLow Profile MoldingsNew ProductsInterior Moldings
If you have a different idea or need a special bracket, we are always willing to work with you. Custom work makes our job more interesting.

36-40 FORD SINGLE CHIN BAR without NERF BARS
The price is $325 plus shipping and handling.

BUMPERETTES
Built from our 3/4" half round stock, polished to a mirror finish and are 12" long. Bumperettes add a little flair to either the front or rear of your car. Available in Straight brackets for $215 a pair or $230 a pair for 20 degree brackets plus Shipping and Handling.
CHEVY NERF BARS
Are built specifically for early Chevrolets. They are available in 8" or 10" double bend versions with the correct 9/16" threads, allowing them to be threaded into the frame rails with a 2" shank. Built from solid type 304 stainless steel and polished to a mirror finish. They come as a set of two complete with jam nuts. (8" are $185 and 10" are $195 plus S&H.)

These nerf bars also look good on Tom Hentschell's '36 Ford.
8" DOUBLE BEND NERF BARS
These are our best sellers. The vertical bar is 8" tall and made from 3/4" solid stainless. The mounting bracket is 2"x10"x3/16" stainless. The entire piece is ground and polished to a mirror finish. The cost is $150 (set of 2). Plus S & H.




8" DOUBLE BEND NERF BARS
Below and to the right are examples of the 8" double bend nerf bars on vehicles.

Above are 8" double bend nerfs with straight brackets on Larry Lambert's 1937 Ford Coupe.

Above are 8" double bend nerfs with custom brackets on Tom Henschell's 1936 Ford.


10" DOUBLE BEND NERF BARS
The same as the above set only the vertical bar is 10" tall. The cost is $160 (set of 2) plus shipping & handling.

10" DOUBLE BEND NERF BARS
Below are 10" double bend nerf bars on Jerry Bigelow's 1938 Chevy 2 door sedan Town Car. (FRONT & BACK)
On the right are 10" double bend nerf bars also.

V NERF BARS
Vertical bar is 8" tall and bent to a V. The cost is $140 (set of 2) plus shipping & handling.

V NERF BARS
Below and to the right are V nerf bars on vehicles.

DOUBLE BEND NERF BARS WITH 20 DEGREE BRACKETS (For Model A's, 31's, 32's, 33/34 Fords, etc.)
Pictured above are the 10" double bend nerf bars with 20 degree brackets. These nerfs can be used on the front or back of many streetrods having frame horns that curve down. The mounting brackets have a 20 degree bend in them to keep the vertical bar square to the ground.
$175 (set of 2) plus S & H.
Also available with 8" vertical bars for $165.
DOUBLE BEND NERF BARS WITH 20 DEGREE BRACKETS (For Model A's, 31's, 32's, 33/34 Fords, etc.)
10" are $175 (set of 2) plus S & H.
8" are $165 (set of 2) plus S & H.

Above are our 10" double bend nerf bars with 20 degree brackets on a '37 Chevy Coupe owned by Roger & Mary P.
Randy & Susan Combs used our 8" double nerfs with 20 degree brackets for their 34 Ford.

Pictured above are 8" double bend nerfs with the 20 degree brackets on Mike Williams 31 Ford Truck.

This '34 Chevy Sedan above and to the left, has our 8" double bend nerf bars with the 20 degree brackets.

Tom Chatham from CA added our 8" double bend nerf bars with 20 degree brackets on his '31 Ford.

33/34 FORD FLAT & DRILLED NERF BARS
Built specifically for 1933/1934 Fords, these nerfs are contoured to fit the downward arc of the front frame horns. Built from 3/8" thick type 304 stainless steel, we water jet cut the shape so each nerf is exactly the same. We then polish each one by hand to a mirror finish. They come without the mounting holes drilled. If you would like us to drill them, contact us and we we would be happy to do it at no extra charge. Although these are built for 33/34 Fords, they can be easily adapted to other years and makes.
$225 (set of 2) plus S & H.

Tommy Keaton added our flat and drilled nerf bars to the front and back of his 1934 Ford 3 window Coupe.
GULLWING NERFS
10" tall of solid stainless steel. Also in 8" tall. $160 (set of 2) Plus S&H




32 FORD CHIN BAR
This is an old design used in a new way on the ever-popular 32 Ford. Built from solid 3/4" diameter, type 304 Stainless Steel and polished to a mirror like finish. This chin bar offers a new look, and an alternative to the traditional straight or V'd spreader bar while maintaining the traditional look of a 32. Also available for Model A's and pinched frames by special order. $330 plus S & H. (Without emblem for $310.)


33/34 FORD CHIN BAR
This piece has our popular 33/34 Ford, 10" tall nerf bars. The horizontal bar is contoured to follow the grill on a 33/34 Ford. Brackets are made from 3/16" X 2", type 304 stainless steel and are 10" long. The vertical and horizontal bars are 3/4" diameter, type 304 solid stainless steel. The entire piece is hand polished to a mirror finish. These add an elegant look as well as a little protection to your prized ride. Price is $305 + S&H.


Above is a custom, tight fitting version.
35-40 FORD CHIN BAR
This is setup to fit the frames of 35-40 Fords. It is built from 3/4" solid stainless steel and polished to a mirror finish. The vertical bars are 10" tall and the brackets are 10" long. You drill the holes so you have adjustment. Cost is $290 Plus S & H.

35-40 FORD DOUBLE CHIN BAR
Solid stainless steel, polished to a mirror finish. Gives a nostalgic look to your Ford. $365 plus S & H.


This Chin Bar is for a 33/34 Ford.

33/34 Ford Highboy

SIDE NERF BARS
These are made from 3/4" solid round bar. $350/set plus S/H.


These are side nerf bars on Bob Melani's 1932 from PA.

This is a custom Bonneville Push Bar.


These are our V nerf bars with custom brackets.

The picture on the left and above are custom nerf bars for a '34 Chevy Coupe owned by Bob Burmeister from Apple Valley, CA.